Removes rust from metal prior to painting. Clings longer to remove rust from vertical surfaces. Provides a clean surface free of contaminants, which creates a secure bond for any primer, paint, coating etc.
Earth-Friendly: Water-Based . Biodegradable . Non-Flammable
Item# Item Name Listing Price Our Price Qty Add
RG32-BOX Krud Kutter Rust Remover Gel 32oz - (Box of 6)
Save past the box: $fourteen.28 ea

$101.93

$85.68

(Out of Stock)
Check the items yous wish to purchase, so click

Technical Specs:

Of import:
Always test first on an inconspicuous surface area. For best results apply in ambience temperature of 70F or above. On metal, maintain wet solution on surface to remove rust. Once the rust is dissolved, rinse or wipe the surface, and wait i hour or more before painting. Do non allow remover to dry out on painted surfaces. For improved paint adhesion on make clean metal surfaces, dilute remover 50/50 with water, use solution, and rinse or wipe the surface. To utilise as a rust inhibitor on unpainted metallic, allow the remover to dry on the surface later on the rust is dissolved. The remover will then protect blank metal confronting rust for up to 12 months. MFR will etch concrete and plough the surface white. Recommend covering physical with a plastic drib fabric for protection.
Practice Not USE ON CONCRETE OR MARBLE.
COVERAGE: 50sq.ft./quart.

Caution
Eye and skin irritant. In case of contact with eyes or skin, flush with water for 15 minutes. If irritation persists, seek medical attention. If swallowed, take big amounts of water. Do not induce vomiting. Get medical attending. Textile Safety Data Sheet available.
DO Non MIX THIS Product WITH ANY OTHER CHEMICALS.
Go along OUT OF REACH OF CHILDREN.

Extended Data:

Directions for utilise:
Remove oil and grease from the metal to be treated. Rinse the metal to break the surface tension and wash away loose dirt. Apply the remover by brush, spray or by dipping. Employ plastic, glass or stainless steel containers. Disassemble units composed of moveable parts earlier cleaning. Clean parts and let to dry out before reassembling
Dissolving rust from fe or steel:
Apply the remover as required to penetrate the rust. Chemical action begins at once. Cleaning time will vary according to the rust. Medium to light rust will be dissolved in thirty minutes or less, while heavier deposits may require a second awarding.
Aluminum/Chrome:
Use the remover to wet surface. Allow fourth dimension to make clean, then rinse away with clean h2o, and vitrify dry out with a cloth.
Galvinizing:
Where surface is unbroken, treat as suggested for aluminum. Where rust is showing at the surface, care for every bit for atomic number 26 or steel. New galvinizing is properly prepared for painting by applying the removerand assuasive to dry on surface.
Bathroom/Shower/Toilet Cleaner:
Dissolves about calcium, lime and other hard h2o stains on porcelain, tile, fiberglass, and glass. Spray remover directly onto surface, let sit for v minutes. Agitation with castor will speed penetration. Rinse away with water when stain is removed.
Machine Cooling System:
Removes oxides and rust when circulated in the system. When cleaning activity is complete, affluent organization with fresh water and refill with coolant.

Share your knowledge of this product with other customers... Be the beginning to write a review