How To Remove Window Switch

Today'south vehicles have ability windows. Some vehicles nonetheless have the option to have mechanical windows. For the most function, power window switches are used to operate the windows on standard economy vehicles. Luxury vehicles are introducing the new touch-complimentary, voice activated window switch.

The window switch on the commuter door powers all of the windows in the vehicle. There is also a cut out switch, or a window lock switch, that allows only the driver door to activate the other windows. This is a skillful idea for small children or animals who may accidentally fall out of a moving vehicle.

The window switch on the driver door is usually combined with the door locks. This is called the switch panel or cluster panel. Some switch panels take removeable window switches and other switch panels are one slice. For the forepart passenger and rear passenger doors, at that place is just a window switch and not a switch panel.

The cutting out switch is the power supply switch to the passenger doors. Mutual signs of power window switch failure include windows not working properly or non at all and windows that just work from the master switch. If the switch does not operate, the computer senses this situation and displays the engine calorie-free forth with an embedded lawmaking. Some common engine lite codes related to the power window switch are:

B1402, B1403

Office 1 of 4: Verifying the ability window switch condition

Step 1: Locate the door with the damaged or faulty ability window switch. Visually look at the switch for any outside damage.

Gently press down on the switch to see if the window will go down. Gently pull up on the switch to see if the window will go upwardly.

• Note: Some vehicles only operate the power windows with the key in the ignition and the tumbler turned on or in the accessories position.

Role 2 of four: Replacing the ability window switch

Materials Needed

• Boxed end wrenches
• Cross tip screwdriver
• Electric cleaner
• Flat tip screwdriver
• Lisle door tool
• Needle nose plyers
• Pocket apartment tip screwdriver
• Ratchet due west/metric and standard sockets
• Torque bit set

Step 1: Park your vehicle on a apartment, hard surface.

Step 2: Place bicycle chocks around the rear tires. Engage the parking restriction to lock the rear tires from moving.

Step 3: Install a 9 volt bombardment saver into your cigarette lighter. This will keep your figurer live and keep your setting electric current in the vehicle.

If you do non take a nine volt battery saver, that is okay.

Step 4: Open the vehicle'south hood to disconnect your battery. Take the basis cable off of the battery's negative postal service disabling the power to the power window switches.

For vehicles with a popular out power window switch:

Pace five: Locate the door with the faulty ability window switch. Using a flat tip screwdriver, slightly pry up all effectually the switch base or cluster.

Pop out the switch base of operations or cluster and remove the harness from the switch.

Step six: Pry out the locking tabs. Using a small pocket flat tip screwdriver, slightly pry on the locking tabs on the ability window switch.

Pull out the switch from the base or cluster. You may demand to employ needle nose plyers to help pull out the switch.

Step 7: Get electrical cleaner and make clean out the harness. This removes any moisture and debris to create a consummate connection.

Step 8: Pop the new power window switch into the door lock cluster. Ensure that the locking tabs snap onto the power window switch keeping it secured.

Step 9: Hook up the harness to the power window base or cluster. Snap the power window base or cluster into the door console.

Y'all may need to apply a pocket flat tip screwdriver to help the locking tabs slide into the door panel.

For vehicles with a mounted panel power window switch on late 80'due south, 90's, and modern day vehicles today:

Step 10: Locate the door with the faulty power window switch.

Step 11: Remove the inner door handle. To do this, pry the cup-shaped plastic cover out from nether the door handle.

This component is separate from the plastic rim around the handle. There is a gap in the forwards edge of the cup-shaped cover, then y'all can insert a flat screwdriver. Remove the encompass, and underneath there is a cross tip head screw which must be removed. The plastic rim tin then be removed from effectually the handle.

Stride 12: Remove the console on the within of the door. Gently pry the panel away from the door all the way around.

A apartment screwdriver or a lisle door tool (preferred) helps here, but be gentle so you don't harm the painted door around the panel. Once all the clips are loose, catch the panel top and bottom and curve information technology slightly away from the door.

Lift the whole panel straight up to lift information technology clear of the grab behind the door handle. As you lot practice this, a large coil spring volition fall out. This spring sits behind the window winder handle, and information technology'due south somewhat fiddly to get back into identify equally you reinstall the panel.

• Note: Some vehicles may have bolts or torques bit screws that concord the panel secured to the door. As well, you lot may need to disconnect the door latch cablevision to remove the door console. The speaker may demand to be removed from the door console if mounted from the outside.

Stride xiii: Pry on the locking tabs. Using a small-scale pocket apartment tip screwdriver, slightly pry on the locking tabs on the power window switch.

Pull out the switch from the base or cluster. Y'all may need to use needle nose plyers to help pull out the switch.

Pace 14: Get electric cleaner and clean out the harness. This removes any moisture and debris to create a complete connection.

Step xv: Pop the new ability window switch into the door lock cluster. Ensure that the locking tabs snap onto the power window switch, which keeps it secured.

Step sixteen: Hook up the harness to the power window base or cluster.

Step 17: Install the door console onto the door. Slide the door panel downwards and in towards the front of the motorcar to ensure that the door handle is in place.

Snap all of the door tabs into the door securing the door panel.

If you removed the bolts or screw from the door console, brand sure that yous reinstall them. Likewise, if you disconnected the door latch cable to remove the door panel, make sure that y'all reconnect the door latch cable. Finally, if you had to remove the speaker from the door console, be sure to reinstall the speaker.

Pace 18: Install the inner door handle. Install the screws to secure the door handle to the door panel.

Snap the screw cover in place.

Pace nineteen: Open the vehicle'south hood if information technology is not already open up. Reconnect the ground cable back onto the battery's negative mail.

Remove the ix volt bombardment saver from the cigarette lighter.

Step 20: Tighten the bombardment clench. Ensure that the connection is good.

• Note: If you did non have a nine volt battery saver, you will have to reset all of the settings in your vehicle, similar your radio, electric seats, and electric mirrors.

Pace 21: Remove the cycle chocks from the vehicle. Clean upward your tools besides.

Part 3 of 3: Testing the ability window switch

Pace 1: Bank check the power switch function. Turn the key to the on position and printing on the up side of the switch.

The door window should become up with the door open up or the door closed. Printing the downwards side of the switch. The door window should go downwardly with the door open or the door closed.

Press on the cutting out switch to lock the passenger windows. Check each window to make sure they are locked. At present, printing on the cut out switch to unlock the passenger windows. Cheque each window to make sure they operate.

If your door window does not open after replacing the ability window switch, then at that place may be further diagnosis of the power window switch assembly needed or a possible electronic component failure. If you practice not experience confident doing the job yourself, have one of YourMechanic's certified technicians perform a replacement.

The statements expressed above are only for informational purposes and should be independently verified. Delight see our terms of service for more details

Source: https://www.yourmechanic.com/article/how-to-replace-a-power-window-switch-by-marvin-sunderland

Share this post